|
Methods
of payment accepted: 
via Paypal, cash, cashier's check, money order, check, bank wire
transfer.
Some of the
players that have used Ted Harris Custom Cues...
Antonio
Lining, Danny
Green, David
Smith, Dennis Hatch, George
San Souci, Jose
Parica, Kevin
West, Mark Cavalier, Nick Schulman, Scotty Townsend, Shintaro
Sugaya, Tony
Robles, & Wade Crane...to name a few!
Cue Index
- Joint Pins - Standard
Cue Features - Options
The
custom cues handcrafted by cuemaker Ted Harris are
selected from the finest exotic woods, adhesives, &
materials available to cuemakers today. The exotic woods
that are offered in these cues come from the farthest
reaches of the world.
This
is what Ted has to say about cuemaking...
"It is my goal to continually strive to provide
the customer with excellent customer service, the finest construction techniques,
materials & hand craftsmanship to build the
finest playing cue that money can buy."
All cues come with
2 shafts & joint protectors, and have ring
work throughout. Standard wraps are all pressed
& polished Irish Linen.
Cue Index
(updated
daily until complete)
Pictures taken in new format by;
The
following pictures & explanations show some of materials &
construction techniques that are used in the construction of Ted
Harris Custom Cues. These techniques are used in an attempt
to provide the best hitting and finest constructed cue made today.
The joints
pins are 3/8 x 7.5 radial. Radial pins allow for more
contact between the shaft & the pin, providing a more solid
hit than standard wood to wood joints. Because of the
precise manufacturing tolerances of the radial pin, they can be
inserted into the butt & shaft more precisely. This also
allows all shafts to be interchangeable with all butts.
This one is brass, and
is polished to a high finish.
This one is stainless, and is
also polished to a high finished. Note the construction
technique of the joint; a thin walled stainless steel joint over
black phenolic.
This shows construction of the
joint with the ivory also being sleeved over black phenolic.
This is the Ted Harris logo on
an ivory butt plate with double brass rings.
Below
is a list of standard cue features & options!
Standard
Cue Features...
Length=58"(up
to 61" on request)
Diameter of shafts=13mm(can be made from 10mm to 14mm on
request)
Joint= Flat faced linen phenolic; black or white
Joint Screw=3/8 x 7.5 Radial Pin; aluminum, stainless
steel, or brass available.
Joint protectors
Point construction=spliced
Shaft Material=North American hard rock maple
Shaft Taper=custom pro taper
Ferrules=melamine
Tips=Le pro, Triangle, Water Buffalo, Sumo
Wrap=Irish Linen
Butt Materials=Exotic hardwoods; cocobolo, bocote, purple
heart, ebony, birdseye maple, curly maple, etc...other exotic
woods available as an option.
Butt Cap=Linen Phenolic; black or white
Finish=Acrylic urethane 2-part
Options...
Other Exotic Woods=call
for quote
Inlays= call for quote
Structural points=$55- each
Veneers on points(1 layer or more)=$110-
Custom Ring
work =$110- & up
Extra Shaft=$100
Predator Shaft=$200
Ivory Ferrule=$75-
Ivory Joint Rings=$55- each
Stainless steel joint=$55-
Ivory Joint=$165-
Ivory Butt Cap=$220-
Leather wrap=$100-+up
Stack leather wrap=$100-
Jump Section w/radial pin=$75-
Jump Section w/uni-loc=$110- | 
